LiquidVPN
Knowledgebase

In this guide we will be using the built in VPN dialer for a PPTP Connection.

 1.   Click the System Preferences icon.  System Preferences Icon


 
2.   Click Network.Network Icon


 3.   Click the + sign.
Network Connections



 4.   Select VPN under interface.
Select VPN


 5.   Set VPN Type to PPTP and name your connection
VPN Type set to PPTP



 6.   Enter in server information for the desired PPTP VPN server, as well as your account name for the vpn. then Click Authentication Settings...
Server Address/Account Name/Authentication Settings



 7.   In the Authentication Tab your going to want to enter in your VPN password.
Select VPN


 8.   Click Ok,  then Click Advanced Verify Send all traffic over VPN connection is checked. If not put a check in the box, Click Ok, Click Apply, Click Connect!
Connect!
Was this answer helpful?

Also Read

Share Your VPN protected Internet Connection to other devices via L2TP on Mac OSX
From your native L2TP VPN client you can share your VPN connection to other devices like game...
Using OpenVPN with Tunnelblick
Install, Configure and Connect with Tunnelblick Start tunnelblick. You may be required to...
Download LiquidVPN and Get Connected From Your Mac
Connecting to LiquidVPN on a Mac with version 10.6 and above is very simple. With the steps below...
L2TP with the OS X Built In Dialer
Install, Configure and Connect with L2TP/IPSEC Click the System Preferences icon. Click...